3D Printing Service Disclaimer and Agreement
3D PRINT SERVICE AGREEMENT AND DISCLAIMER
Print-For-Me – Updated 2026
This 3D Print Service Agreement and Disclaimer (“Agreement”) governs all 3D printing services (“Service”) provided by Print-For-Me (“Company,” “Print-For-Me,” “we,” or “us”).
By submitting a model, requesting a quote, or purchasing a print, the customer (“Customer”) acknowledges and agrees to the terms below.
- DESIGN RESPONSIBILITY & MODEL INTEGRITY
1.1 The Customer is solely responsible for ensuring that their design is structurally sound, printable, and appropriate for the intended use.
1.2 Print-For-Me does not modify, repair, or validate models unless agreed upon in writing.
1.3 Print-For-Me is not responsible for print failures or performance issues resulting from poor model design, insufficient wall thickness, weak geometry, improper tolerances, or incompatible assembly fit. - PRINT ACCURACY & TOLERANCES
2.1 Due to the nature of FDM/FFF 3D printing, Printed Items may contain minor imperfections, including:
Layer lines
Support marks
Slight warping
Small surface artifacts
Color or finish variations
2.2 Dimensional variances of ±0.5 mm or ±1% (whichever is greater) are considered acceptable and are not defects.
2.3 Exact dimensional accuracy, perfect surface finish, and injection-molded appearance cannot be guaranteed.
- MATERIAL SELECTION & SAFETY
3.1 The Customer is responsible for choosing the appropriate material for their application.
3.2 Unless explicitly stated:
Printed Items are not food-safe.
Printed Items are not heat-proof or UV-resistant.
Printed Items are not electrically insulated or fire-rated.
3.3 The Customer assumes all risks associated with material performance.
- PROHIBITED MODELS
The Customer agrees not to submit models that are:
Weapons or weapon components
Illegal in any jurisdiction
Designed for life-safety or emergency-critical use
Regulated, restricted, or requiring certification (e.g., medical devices, PPE, automotive safety parts)
Intended to circumvent laws or security systems
Print-For-Me may refuse or cancel any job at its sole discretion.
- INTELLECTUAL PROPERTY & CUSTOMER RIGHTS
5.1 The Customer warrants they possess the legal rights to print any submitted files.
5.2 Print-For-Me is not responsible for any copyright, patent, or trademark disputes arising from Customer-submitted designs.
5.3 Print-For-Me may retain copies of submitted files solely for the purpose of fulfilling the transaction and handling potential reprints or support issues.
5.4 Print-For-Me claims no ownership over the Customer’s design. - QUALITY, INSPECTION & DEFECT REPORTING
6.1 All 3D printed items are custom-made and non-returnable, except in the case of confirmed printing defects.
6.2 The Customer must inspect Printed Items within 5 business days of delivery and report defects with:
Clear photos of the item,
Description of the issue,
Order details.
6.3 Claims submitted after 5 days may not be accepted.
6.4 Post-processing performed by the Customer—including sanding, drilling, gluing, painting, heating, or modifying—voids any defect claim.
- REPRINT POLICY
7.1 Print-For-Me may provide a reprint only if the defect is confirmed to result from:
Printer malfunction
Material defect
Incorrect print settings used by Print-For-Me
7.2 Reprints will not be issued for:
Model design flaws
Tolerance complaints within acceptable ranges
Customer misuse, modification, or post-processing
Incorrect material selection by the Customer
Prints damaged after delivery
7.3 Print-For-Me’s liability is strictly limited to the cost of the original print.
- FUNCTIONAL, LOAD-BEARING & SAFETY-CRITICAL USE DISCLAIMER
8.1 Printed Items are not certified for:
Structural or load-bearing applications
Automotive, aerospace, or industrial machinery
Medical, surgical, or diagnostic use
Electrical enclosures requiring safety ratings
Any life-safety or failure-critical scenario
8.2 The Customer assumes full responsibility for:
Testing
Validation
Safe use
Suitability for intended purpose
8.3 Print-For-Me is not liable for failure, damage, injury, or loss resulting from the use of Printed Items.
- TURNAROUND & ORDER PROCESSING
9.1 Typical production time is 3–5 business days, but may vary based on:
Print complexity
Order volume
Material availability
Printer maintenance
9.2 Rush orders may be accepted at Print-For-Me’s discretion and may incur additional fees.
9.3 Processing times are separate from shipping times.
- SHIPPING, LOSS, AND DAMAGE
10.1 Print-For-Me is not responsible for:
Delays caused by carriers
Lost or stolen packages
Damages occurring during shipping
10.2 If a shipping issue occurs, the Customer must contact the carrier directly.
10.3 Print-For-Me may offer assistance but cannot guarantee resolution.
- WARRANTY & LIMITATION OF LIABILITY
11.1 Printed Items are provided AS-IS with no warranties, express or implied, including merchantability or fitness for a particular purpose.
11.2 Print-For-Me’s liability is limited exclusively to the value of the Service provided.
11.3 Under no circumstances shall Print-For-Me be liable for:
Incidental, consequential, or indirect damages
Loss of property, data, revenue, or equipment
Personal injury or property damage resulting from use of Printed Items
- SERVICE MODIFICATION & TERMINATION
Print-For-Me reserves the right to:
Modify pricing or materials
Refuse or cancel jobs
Terminate this Service at any time for any reason
- GOVERNING LAW
This Agreement is governed by the laws of the State of South Carolina, USA, without regard to conflict-of-law principles.
Any disputes shall be resolved in South Carolina courts or through an agreed-upon arbitration venue.
By submitting a print request or purchasing a 3D printing service from Print-For-Me, the Customer acknowledges that they have read, understood, and agree to be bound by this Agreement.
Print-For-Me – 2026